ETS/Theodore Tutorials 
Principles and Practices of Engineering (PE)
Two Sample (NCEES) PE Examinations in Chemical Engineering

Problems and Solutions for Chemical Engineers

Udomlug Siriphonlai
Ann Marie Flynn
Louis Theodore
 

Published by ETS Professional Training Institute
2000 Louis Theodore. 340 pages.


--------------------------------------------------------------------------------

 

Table of Contents 

ABOUT THE THEODORE TUTORIAL
ON BECOMING A PROFESSIONAL ENGINEER
INTRODUCTION TO THE NCEES PE EXAMINATION
WHAT TO EXPECT (drawn in part from the NCEES literature)
PREFACE TO THIS THEODORE TUTORIAL
PROCEDURE TO FOLLOW IN USING THIS THEODORE TUTORIAL
ADDITIONAL SUGGESTIONS

FLUIDS

AFA1  Flow Through Pipes and Fittings I
AFP1  Units; Multi-line Flow
AFP2  Density and Viscosity Effects; Pump Requirements; Pipe Economics
BFA1  Continuous Stirred Tank Reactor
BFA2  Particle Settling Velocity
BFP1  Flow Through Pipes and Fittings II

HEAT TRANSFER

AHA1  Shell and Tube Heat Exchanger I
AHP1  Heat Exchanger Definitions; Double Pipe Heat Exchanger
BHA1  Optimum Design of Pipe Insulation
BHA2  Thermal Radiation
BHP1  Design of a Trombone Heat Exchanger
BHP2  Shell and Tube Heat Exchanger II

KINETICS

AKA1  Batch Reactor
AKP1  Chemical Kinetics Fundamentals
BKA1  Minimum Volume of CSTR's in Series
BKP1  Conversion Mechanisms

MASS AND ENERGY BALANCES

ASA1  Stoichiometric Principles
ASA2  Flame Temperature
ASP1  Enthalpy Calculations
ASP2  Humidity Calculations
BSA1  Lime Requirement for Acid Gas Control
BSA2  Theoretical Adiabatic Flame Temperature
BSP1  Material Balances on Multiple Units
BSP2  Flue Gas Flow Rate Calculations

MASS TRANSFER

AMA1  McCabe-Thiele Distillation
AMP1  Adsorption Fundamentals and Regeneration
AMP2  Absorber Tower Height and Diameter
BMA1  Tray Efficiency Using McCabe-Thiele Method
BMA2  Liquid-Liquid Extraction
BMP1  Adsorber Design

PLANT DESIGN

APA1  Air Pollution Control Equipment Selection
APP1  Recycle Process; Cooling Tower Calculations
APP2  Reactor Conversion; Liquid-Vapor Separator Design; Explosion Principles
BPA1  Thermal Pollution
BPA2  Reduction of Degreaser Emissions
BPP1  Quick Sizing of Distillation Columns

THERMODYNAMICS

ATA1  Chemical Reaction Equilibrium Constant
ATP1  Thermodynamic Fundamentals
BTA1  Theoretical Adiabatic Flame Temperature (TAFT) for a Combustion Waste Mixture
BTP1  Vapor Liquid Equilibrium

SOLUTIONS

Solutions to FLUIDS
Solutions to HEAT TRANSFER
Solutions to KINETICS
Solutions to MASS AND ENERGY BALANCES
Solutions to MASS TRANSFER
Solutions to PLANT DESIGN
Solutions to THERMODYNAMICS

APPENDIX
INDEX
EPILOGUE

 


Copyright 2000, ETS Incorporated



This site is powered by:
Aliquant Website Content Management System Home Page
Aliquant Content Management System